Start Free Trial
Waterway

ProClean Plus PCCF 75–200

Cartridge Filter and Pump System

Waterway ProClean Plus single-cartridge filter family in 75 through 200 square-foot sizes, plus related one-piece-base pump-system packages documented in the ProClean Plus and ProPack manuals.

Waterway ProClean Plus Cartridge Filters and Filter Systems

Specifications

Filtration
Filter TypeSingle-cartridge filter
Filter AreaPCCF-075: 75; PCCF-100: 100; PCCF-125: 125; PCCF-150: 150; PCCF-200: 200 sq. ft.
Max Residential Flow Rate75, 100, 125, 150, and 150 GPM respectively
Max Public Pool Flow Rate28, 37, 47, 56, and 75 GPM respectively
Maximum Operating Pressure50 PSI (345 kPa)
Maximum Water Temperature104°F (40°C)
Cleaning Pressure NoteNormally clean at 10 PSI above startup pressure; clean sooner if attached features lose required flow
Physical
Plumbing Connection2 in. NPT inlet and outlet; 3/4 in. drain on the PCCF filter drawing
Service HeightPCCF-125, 150, and 200 drawing requires 42 5/16 in. minimum service height
Package BoundaryComplete ProClean Plus and ProPack systems use different one-piece-base pump and plumbing arrangements; those package layouts do not change the PCCF filter ratings

Pros & Cons

Pros

  • Five filter sizes share the same operating and service procedure.
  • The manual separates residential and public-pool flow limits for every model.
  • Standalone and pump-system package manuals use the same documented cartridge and service parts.

Watchouts

  • Package plumbing and base assembly differ between the 810-0183 and 810-0385 system manuals.
  • The filter must not exceed 50 PSI or 104°F water temperature.
  • All pressure must be released and the tank drained before the lock ring is loosened.

Error Codes & Troubleshooting

Short Cycle Time
Check cartridge loading, sanitizer residual, water balance, algae, and cartridge condition.
Low Flow / High Pressure
Clean a plugged cartridge and check for downstream blockage or undersized piping.
Low Flow / Low Pressure
Clean the pump or debris basket.
Pool Water Not Clean
Check sanitizer residual and replace a torn, plugged, or punctured cartridge.
Pool Cleaner Stops
Clean the filter; if cleaner performance returns, use a pressure-rise threshold below 10 PSI.

Open full interactive troubleshooter →

Replacement Parts

PartPart NumberDescription
Pressure Gauge830-4000SSFilter pressure gauge.
Lock Ring Assembly550-0701ProClean tank lock ring.
75 sq. ft. Cartridge817-0075PReplacement for PCCF-075.
100 sq. ft. Cartridge817-0100PReplacement for PCCF-100.
125 sq. ft. Cartridge817-0125PReplacement for PCCF-125.
150 sq. ft. Cartridge817-0150PReplacement for PCCF-150.
200 sq. ft. Cartridge817-0200PReplacement for PCCF-200.
Drain Cap with Gasket550-0260Filter drain-cap assembly.

Related Models

Waterway crystal water aqua clean cartridge filter troubleshooter icon
Crystal Water / Aqua Clean 325–525
Waterway
larger four-cartridge family
Waterway clearwater ii cartridge filter troubleshooter icon
ClearWater II Cartridge
Waterway
above-ground cartridge system

Related Articles

Track This Equipment on Customer Accounts

Log equipment details, service history, and warranty info for every customer with PoolDial.

Start Free Trial