Power Defender 165–350
Power Defender Diagnostic Guide
Startup, stall, voltage, temperature, load, memory, and communication checks for documented E0–E34 faults.
Open guide →Waterway Troubleshooting Guides
Field-ready guidance built from Waterway installation and operation manuals. Confirm the exact product first, record displayed messages and clean starting pressure before resetting anything, and keep electrical, internal control, and pressurized-vessel work inside the manual's service boundary.
Interactive diagnostics
Manual-backed guides
NEO 1500 and NEO 2100
NEO Spa Control Diagnostic Guide
Shared plumbing, flow, overheat, freeze, and Sensor 1–3 messages while preserving model-specific wiring boundaries.
Open guide →OASIS Pool and Spa Control
OASIS Wi-Fi Recovery Guide
2.4 GHz placement, app restart, power cycle, router, reset-network, and reconfiguration steps.
Open guide →ProClean Plus PCCF 75–200
ProClean Plus Diagnostic Guide
Short-cycle, pressure, flow, cartridge, water-clarity, and pool-cleaner checks from the PCCF manuals.
Open guide →Carefree FS01619–FS02629
Carefree Sand Filter Diagnostic Guide
Pump, flow, filtration, pressure, backwash, and multi-port-valve checks for Carefree systems.
Open guide →Key equipment specifications
These values are copied from the reviewed Waterway manuals and preserve the applicable model boundaries. Open the complete equipment record for additional physical, compatibility, parts, and service-reference details.
Power Defender 165–350
- Motor sizes
- 1.65, 2.25, 2.70, or 3.45 THP
- Speed range
- 600–3450 RPM
- Supply
- 165: 115 or 230 VAC; 225, 270, and 350: 230 VAC
- Programming
- Seven timers plus a 30-minute Clean cycle at 3450 RPM
NEO 1500 and NEO 2100
- Supply diagrams
- 115/120 V and 230/240 V configurations
- Typical 230 V setup
- 12 A pump; 5.5 kW heater; 48 A equipment rating
- Typical 115 V setup
- 10 A pump; 1.0 kW heater; 15 A equipment rating
- Scheduling
- Four filter cycles plus No Heat Time and equipment timeouts
OASIS Pool and Spa Control
- Controller supply
- 120 or 240 VAC, 60 Hz, 1.67 A
- Capacity
- Six assignable functions with four schedules per function
- High-voltage rating
- 25 A; 3 HP at 240 V or 1.5 HP at 120 V
- Wi-Fi
- 2.4 GHz; module at least 10 ft from motors or heavy electrical equipment
ProClean Plus PCCF 75–200
- Filter area
- 75, 100, 125, 150, or 200 sq. ft.
- Residential flow
- 75, 100, 125, 150, or 150 GPM by model
- Public-pool flow
- 28, 37, 47, 56, or 75 GPM by model
- Operating limits
- 50 PSI maximum; 104°F maximum water temperature
- Cleaning trigger
- Normally 10 PSI above clean starting pressure
Carefree FS01619–FS02629
- Tank sizes
- 16, 19, 22, or 26 in.
- #20 silica sand
- 100, 150, 250, or 300 lb by model
- Pump supply
- 110 VAC, 20 A, GFCI protected; no extension cord
- Cleaning trigger
- 5 PSI above clean starting pressure
Browse all 13 entries in the Waterway equipment library.