Waterway

Carefree Standard 16–26

Above-Ground Sand Filter System

Waterway Carefree Standard above-ground high-rate sand filter systems in 16, 19, 22, and 26-inch sizes, paired with documented one- or two-speed Hi-Flo II pump options and a seven-position multi-port valve.

Waterway Carefree Standard High-Rate Sand Filter System
110 VAC
Voltage

Specifications

Filtration
Filter TypeHigh-rate sand filter with seven-position multi-port valve
Filter Size16, 19, 22, or 26 in. tank
Media ChargeFS01619: 100 lb; FS01922: 150 lb; FS02225: 250 lb; FS02629: 300 lb of #20 grade silica sand
Cleaning Pressure NoteClean when the gauge reads 5 PSI or more above the original starting pressure
Electrical
Voltage110 VAC
Current Draw20 amp service
Required ProtectionGFCI required; follow national and local building and safety codes
Extension CordDo not use an extension cord
Physical
Installation LocationBetween the skimmer and return, 2–5 ft from the pool
Installation SurfaceCompletely flat, level patio block, cement slab, or equivalent
Pump OptionsHi-Flo II 1, 1.5, or 2 HP in one- or two-speed configurations listed in the parts table

Pros & Cons

Pros

  • Four documented tank sizes use exact 100 to 300 lb sand charges.
  • The seven-position valve includes filter, backwash, rinse, waste, closed, and winterizing paths described in the manual.
  • The parts list covers multiple one- and two-speed Hi-Flo II pump options.

Watchouts

  • The system requires 110 V/20 A service and must not use an extension cord.
  • Installation is restricted to a flat surface 2–5 ft from the pool.
  • Valve position must be selected only with the pump off.

Error Codes & Troubleshooting

Motor Does Not Start
Check supply, breaker, thermal overload, wiring, and line voltage as listed in the manual.
No Water Flow
Check suction and return obstructions, impeller, suction leaks, valve position, fittings, basket, and dirty sand.
Excessive Pump Noise
Check bearings, suction blockage, mounting, partially closed fittings or valve, and the trap basket.
Inadequate Filtering
Check sand level, cleaning, dirt load, water balance, and system pressure.

Open full interactive troubleshooter →

Replacement Parts

PartPart NumberDescription
Seven-Position Multi-Port ValveWVS003Complete 1.5 in. multi-port valve assembly.
Pressure Gauge830-30000–60 PSI gauge.
16 in. Lateral and Manifold505-2140Internal assembly for the 16 in. tank.
19 in. Lateral and Manifold505-2150Internal assembly for the 19 in. tank.
22 in. Lateral and Manifold505-2160Internal assembly for the 22 in. tank.
26 in. Lateral and Manifold505-2180Internal assembly for the 26 in. tank.
Pump Trap Basket319-3230Basket assembly for the six-inch pump trap.
One-Piece Base672-7241Shared filter-and-pump mounting base.

Related Models

Related Articles

Track This Equipment on Customer Accounts

Log equipment details, service history, and warranty info for every customer with PoolDial.

Start Free Trial