What voltage does the CMP DEL Ozone 25 / 50 / 100 require?

The CMP DEL Ozone 25 / 50 / 100 operates on 120/240V.

What are the common error codes on the CMP DEL Ozone 25 / 50 / 100?

Common error codes include: Ozone Module Light Not Illuminated, Ozone Tubing Condensation. See the troubleshooting section for details on each.

Electrical
Voltage	120/240V
Frequency	50/60 Hz
Current Draw	0.10A for Ozone 25, 0.24A for Ozone 50, 0.31A for Ozone 100
Breaker Size	Manual calls for GFCI protection if on an independent supply.
Physical
Plumbing Connection	Venturi injector introduces ozone gas into the main return after all other equipment.
Vertical Clearance	Install ozone generator at least 1 ft above maximum water level.
Horizontal Clearance	Install at least 5 ft from pool wall.

Ozone is supplemental sanitation and does not replace residual disinfectant.
Requires safe electrical installation, minimum height above water level, and correct injector/check-valve plumbing.
Service work requires power to be off and the generator disconnected from the power source.
Ozone manifold tubing can contain trace nitric acid condensation during service.

Ozone Module Light Not Illuminated

Service manual startup check says to restore power and confirm the ozone module light or lights are illuminated.

Ozone Tubing Condensation

Service manual warns that trace nitric acid may be present in tubing and calls for gloves and eye protection during manifold disconnection.

Part	Part Number	Description
Ozone Module Subassembly		Service manual upgrade procedure replaces the bracket with ozone modules, power supplies, and manifold.
Ozone Outlet Manifold		Service manual reconnects the new manifold tube to the ozone outlet barb with a new tubing clamp.
Tubing Clamp		Service manual calls for a new tubing clamp when reconnecting the ozone outlet manifold.